This post is for informational purposes only. I am not an attorney. Consult your own advisors for your specific situation. SBA program parameters referenced below are stated as of November 17, 2026 and are subject to change.
Last updated: November 17, 2026
There is one question I get on almost every first call with a buyer, usually within the first five minutes: how long is this going to take? The answer matters more than most people realize, because the buyer has usually already signed a letter of intent (LOI) with a 60 day close written into it, and the seller is already planning the retirement party. We have reviewed more than 1,500 deals over the last three years, and the honest answer is that a well prepared SBA acquisition takes about 45 to 60 days, and a poorly prepared one takes as long as it takes. In Q1 2026, our average time to close on acquisitions under the June 2025 rules was approximately 88 days. Then SOP 50 10 8.1 took effect on October 1, 2026 and added new requirements that sit directly on the critical path. In this post I want to walk through where the time actually goes, the four places the new SOP adds weeks, and what you can do before you sign the LOI to keep your deal on schedule.
Please note our 88 day average includes transactions that have been renegotiated multiple times or where the seller caused long delays in providing the proper paperwork. We have plenty of transactions that close in the 45 to 60 day timeframe as well.
CLX's average time to close on SBA acquisitions in Q1 2026, under the June 2025 rules
CLX internal pipeline data, Q1 2026
Where the 88 Days Actually Go
Most articles on this subject give you a range, usually 60 to 90 days, and stop there. The range is not wrong, but it does not help you, because it does not tell you which parts of the process you control and which parts you do not. In my experience, the deal almost never runs late at the step the buyer is worried about. Buyers worry about the bank approval. The approval is rarely the slow part.
An SBA acquisition moves through five phases. Some of them overlap, and a good lender will run third party reports alongside underwriting rather than after it. That being said, every phase has a different owner, and the clock is set by whichever phase is slowest.
| Phase | What happens | Who controls the clock |
|---|---|---|
| 1. Before the LOI | Equity in place and seasoned, deal prescreened, seller financials and tax returns collected | The buyer |
| 2. Lender selection | Deal packaged, presented to lenders, term sheet issued and signed | The buyer and the broker |
| 3. Underwriting and approval | Lender analyzes cash flow, pulls tax transcripts, reviews credit, issues approval and pulls the SBA authorization | The lender |
| 4. Third party reports | Business valuation, Quality of Earnings on $3M+ purchase prices, real estate appraisal and environmental if property is included | Outside vendors |
| 5. Closing | Closing documents, landlord lease assignment, insurance, final equity verification, credit refreshed within 90 days of closing | Attorneys, landlord, seller, and lender |
It is important to note where the delays usually come from. In the deals I see run late, the cause is almost always one of three things: the seller’s documents are not ready, the buyer’s equity is not where the lender can verify it, or a third party, often a landlord, takes weeks to sign something. None of those are the bank. All of them can be started before the LOI is signed or immediately following signature of that LOI.
The Four Places SOP 50 10 8.1 Adds Time
The SBA published SOP 50 10 8.1 on August 14, 2026, and it took effect on October 1, 2026. I summarized every change in my post on the change of ownership overhaul. Most of those changes affect whether a deal qualifies. Four of them also affect how long it takes.
Properly Documented Equity
First, determining sources of equity. The SBA changed the rules on where equity needs to come from. 10% of the purchase price must be funded with equity, and at least 5% of that equity needs to come from the Borrower. Not only does the borrower need to show their equity or sources for that equity, but the rules changed on how investor equity can be used to meet the other 5% down as well as how lenders look at other investor equity above and beyond the required total 10% equity contribution from the buyer. With more rules to follow, buyers must be sure their equity matches the SBA requirements. You want to be sure your equity partners are aligned on the rules early on, or you risk going back and forth with Bank legal counsel and equity partner legal counsel trying to get equity worked out, which can delay closing.
Secondarily, the Quality of Earnings report. On any acquisition where the business purchase price, excluding real estate, is $3 million or more, the lender must have a Quality of Earnings (QofE) report, and the lender must use the QofE earnings to meet the debt service coverage ratio (DSCR). The lender is supposed to order the report. The question then becomes one of timing. Do you order the report with the lender before the loan is approved, or do you wait until the loan is approved and then start the QofE at that point? QofE reports can take time, so the longer you wait to start it, the longer you wait to get it back. Plus, if there are adjustments that need to be made to the purchase price due to the results of the QofE, you end up negotiating those down the line instead of up front. This can cause an additional delay in getting to closing.
The September 25, 2026 technical updates allow the lender to accept a QofE ordered by the buyer, as long as the lender’s qualified vendor reviews and accepts it. The SBA recently issued an additional update that states a lender may still need to get their own report, although the final language here is still up in the air. If you decide to order your own report, that can speed up the process of getting an answer on the front end. It is also a risk, because a report that does not meet the SBA’s minimum conditions may have to be redone, the SBA may still require the lender to do their own report, and at the very least there will be an added cost of paying for the Bank’s firm to review the report.
Supporting Documentation for Add-Backs
Although the SBA has always loosely required supporting documentation for add-backs, the updated SOP puts a new requirement on lenders to verify any discretionary add-backs. Getting supporting documentation for add-backs from sellers can take time. The sooner you make sellers aware this support will be required, the sooner you can get underwriting completed. Waiting on this documentation could cause delays in underwriting for business acquisitions relying on a large amount of seller add-backs. Keep in mind, lenders are not going to comb through years of bank or credit card statements to find add-backs. They will want to see clear supporting documentation proving that the expense is not a necessary expense or is one-time in nature.
Business Valuation
Lastly, the business valuation. Total debt on an acquisition, including seller notes that are not on full standby, can no longer exceed the business valuation. The old rule used to be that just the SBA 7(a) loan could not exceed the business valuation. A valuation that comes in below the purchase price used to be a negotiation. Now it is a restructure, requiring either more equity, a lower purchase price, a seller note on full standby for the life of the loan, or a combination of these factors. And a restructure late in the process usually means additional negotiations with the seller, revised legal documents, and an updated loan approval, all of which can add time to closing. I wrote about the three ways to close that gap in my post on the new 1.25x DSCR requirement.
| Requirement | Before October 1, 2026 | Under SOP 50 10 8.1 | Timeline impact |
|---|---|---|---|
| Properly documented equity | Could be reduced by investor equity or seller notes | At least 5% of project cost from buyer or guarantors | Investor equity must be properly documented |
| Quality of Earnings | Lender's choice | Required on business purchase prices of $3M or more; buyer-ordered report allowed if the lender's vendor accepts it | Adds a report to the critical path; when to order it is key |
| Supporting documentation for add-backs | Generally required | Now more detail is required | Request support for seller discretionary add-backs early in the process |
| Business valuation | Supported the price | Caps total debt, including non-standby seller notes | A low valuation now forces a restructure |
| Minimum DSCR | 1.15x | 1.25x on initial acquisitions | Thin deals need restructuring before approval |
“The approval is rarely the slow part. The deal runs late at the steps nobody started before the LOI.”
The LOI Date That Sets You Up to Fail
I see the same pattern on a large share of the deals that come to us. The buyer signs an LOI with a 60 day close and a 60 day exclusivity period, because that is what the broker’s template said. Then the buyer starts looking for a lender. By the time the deal is packaged and a term sheet is signed, a third of the exclusivity period is gone, and the third party reports have not even been ordered.
The reason this matters is three fold. First, an exclusivity period that expires before the lender can close gives the seller the right to walk or renegotiate, and sellers do use it. Secondarily, a rushed timeline pushes buyers to skip the steps that protect them, like a QofE they actually understand. Lastly, every extension request costs you goodwill with the seller, and you will need that goodwill when you ask them to put a note on full standby.
Properly document your equity
Be sure all investors understand the agreements they must sign up front for the deal to qualify and for their equity to be used, to avoid negotiations later in the process.
Get the seller's documents
Three years of business tax returns, year to date financials, and confirmation that the returns are filed, not on extension.
Prescreen the deal
Run the cash flow at 1.25x DSCR on historical numbers before you commit to a price. Our free Deal Prescreen at /deal-tools takes a few minutes.
Decide on the QofE
If the business purchase price is $3 million or more, line up a QofE firm that meets the SBA's minimum conditions and confirm your lender's vendor will accept its work.
Talk to the landlord
If the business leases its space, find out early whether the landlord will assign the lease or sign a new one for the term the lender needs.
Write a realistic date
Ask for at least 90 days to close, and an exclusivity period that runs at least as long.
A Word on My Bias
I have to volunteer my conflict of interest here, as I always do. CLX earns a success fee when deals close. I have a financial incentive to encourage you to move forward, and to move fast. I am naming that so you can weigh what follows accordingly, and so you understand why I am telling you to slow down at the LOI stage anyway. A deal that closes on day 95 pays everyone. A deal that dies on day 61 pays no one.
What I Am Telling My Clients This Week
First, do not sign an LOI with a 60 day close on an SBA deal under the new SOP. I know the broker’s template says 60. It was optimistic under the old rules, and it is not realistic now for most deals that need a QofE or have a seller with unfiled returns. If you do need to sign an LOI that is that short on the closing term, be sure there are provisions to extend it if certain metrics are hit, like the loan is approved but you are still waiting on third party reports.
Secondarily, start the slow work first. Properly documenting equity, collecting tax returns, and ordering a QofE are all things you can begin before a lender ever sees the deal. The buyers who close on time are the ones who treat the LOI as the middle of the process, not the beginning.
Lastly, the math still works for the right deals. We have helped clients get more than 924 loans approved, totaling more than $1.46 billion, and the deals that clear the new rules are good deals. A slightly longer timeline is the price of a cleaner file, and a cleaner file is how you get approved the first time.
The Bottom Line
An SBA acquisition takes about 60 to 90 days when the buyer is prepared, and the new SOP has made preparation matter more, not less. The four requirements that add time, properly documented equity, the QofE, supporting documentation for add-backs, and the valuation cap, are all things you can see coming before you sign anything.
If you have questions about how long your SBA acquisition will take, we would be happy to help you find the right answer for your specific situation.
You can reach me directly at brad@commerciallendingx.com or by phone at 630 988 4852.
Brad Hettich, President
Commercial Lending X

Brad Hettich
President, Commercial Lending X
~30 years in commercial banking. Originated close to $1.4 billion, underwritten $2.5 billion+. Brad writes about SBA lending, deal structuring, and commercial credit markets from the perspective of someone who has been on both sides of the desk.
View full bio →Related Transactions
Recent deals related to this topic.
The Client was seeking to acquire a retail and wholesale distribution business. We were able to secure an SBA 7A approval with a traditional lender at a solid rate to facilitate the acquisition.
The Client was acquiring a specialty pet food and supply retailer business. We were able to secure an SBA 7A approval with a traditional lender at a solid rate to facilitate the acquisition.